TP-Link Extender Setup

Looking for ways to extend your home Wi-Fi? Whether you have a big house or multiple obstacles between your wireless device, all you need a TP-Link Range Extender Setup. The TP-Link wifi repeater helps you get the speed you may want in every corner of your house. All you need to place the tplink device at a location where the wireless signals don’t break down. On this web page, you will get all the necessary technical information about the Tplink wifi repeater including tp-link extender setup, tp-link setup wizard, tp-link extender reset, and tp link extender troubleshooting.

How to set up TP-Link Range Extender ?

Setting up the tplink wifi repeater is really an easy process and you can perform it in a few minutes. You can install the extender with or without WPS. So, before you install it, you have to find an optimal location to place it for further technical stuff. TP-Link device comes with the TP-Link extender manual within the package. This manual comprises all the technical information to set up and use your tp-link connect extender efficiently.

Placement of The Extender

The extender signal can be blocked by many obstacles, walls, or electromagnetic interference. So, you have to be careful about the placement of the tplink device. You need to figure out and mark a place where you want to install it or want your signal to be. It is recommended to place the extender closer to your home router or somewhere in the middle of the router and your wireless device. You should place it in an open are for better wireless range.

Setting Up The Tp-link Range Extender

You must know a few things before setting up your extender that includes:

You can check all these details in the TP-Link extender manual. But, in case, you lost its manual then open Command Prompt and type ipconfig/all in the window. You will get the tplinkrepeater.net ip address here. To access the TP-Link setup wizard, you need to type this IP address in the browser’s address bar and log into the extender. Read on the next section to know how to connect to tp-link extender.

Basically there are two methods to install to set up your extender. You can set it up using either http://tplinkrepeater.net web-browser method or a WPS method. However, it depends on your extender. If it features a WPS button then follow the WPS method. If it doesn’t have this button then you need to perform the TP-Link extender setup without WPS button.

TP Link Extender setup with WPS Button

The first step is to plug the extender into a wall outlet. But make sure to place it near your wireless device and your home router.
Now, press the WPS button on the TP-Link extender and wait for it’s LED to blink.
After that, locate the WPS button on the back side of your home router and press it.
It will establish the connection between your router and the tplink re-peater.
Your tplink device will automatically connect to your home network.

If you can’t connect to tp link extender then you can take help from our technicians. You can contact them on a toll-free number.

TP-Link extender setup without WPS Button

In this method, you will have to connect the Tplink wifi repeater to a wireless device like a computer or tablet.
First of all, plug in the extender to a wall-outlet and turn it on.
Now, connect the tplink device to your computer system either through a wired or wireless connection.
Open a web browser and visit http://tplinkrepeater.net in the address bar.
When you reach to the web-interface of the tplink device, click on the Quick Setup.
After that, tap on the Region and then click on Next.
The extender will start scanning for your network, select it and click Continue.
Now, enter the wireless password to connect to the home network.

In case, you face the issue of http //tplinkrepeater.net not working then you can call our technical support team. Our team of experts will provide you with the tp link repeater troubleshooting tips and resolve all your issues.

Steps to Login to the TP-Link Extender

For TP-Link extender login, launch a web-browser and type tplinkrepeater.net ip address in the browser’s window.
You can also type 192.168.1.1 the default IP address of the repeater and press the enter key.
You can find the IP address of your tplink repeater on the bottom of the label product.
On the admin page, type the username and password of the product and click the option login to log into the tplinkrepeater.net settings.

You may face some issues with this tplink device like tp-link extender not connecting to router. For tplinkrepeater.net support, you can contact our experts on our toll-free no.

How to Configure the TP-Link Range Extender ?

For setting up the tplink wireless repeater, you will need some necessary things including, IP address, SSID and Passphrase, and encryption type.
First of all, log into the tplinkrepeater.net settings page.
Once you access the configuration page, choose the Network option.
Make sure the IP address of the extender is same as your router’s IP address.
Click on the Quick Setup option and then click on Next.

After that, tap on the Wireless option and then select the Range Extender as you operation mode.
Now, scan for the networks and choose your SSID from the list.
Click on the SSID name and tap on the option Connection to connect to the network.
Now go to the Wireless Security and select the encryption type i.e. WPA-PSK/WPA-PSK and Encryption AES.
Save the above settings and then set your computer system to obtain the automatically IP address.

For more details related to the tplink extender like www.tplinkrepeater.net reset, tp-link extender reset password, tp-link range extender login, or more you can get in touch with our experts.

TP-Link Extender Won't Connect:

Here are easy instructions to resolve the connection issues:

If you can’t connect to tp link extender then you need to restart the tplink extender. Still you are unable to connect then contact our tplinkrepeater.net support team.

How do I reset my TP-Link Range Extender ?

Hard reset is the perfect method if your TP-Link device has a reset button at the back side. Here are easy steps to hard reset the extender:

These are the steps to reset your extender. Once reset, all the settings of your repeater will reset to the default factory settings. After that, you have to install and configure the tplink wireless repeater using the default username and password and change the settings.

Disclaimer : This website is not affiliated or associated with any 3rd party brand unless specified. Brands,Trademarks,logos and company names are only for referential purpose.